Simms Kid's Tributary Waders - Stockingfoot - Prior Season

Agreeing to our terms and conditions on your order means you are acknowledging the below.  Placing an order allocates product to you, however there may be a manufacturer's lead-time or back-order.  We frequently make changes to the below as brands provide us updates. All lead times are estimations and are not exact time frames.

* Made-to-order products are non-refundable.  Cancellations prior to shipping may be subject to 10-20% cancellation fees.  These brands are noted with (*).

 

Alfa Ovens

Ovens and accessories may have a lead time of a few weeks. Please reach out for current lead time on a given item

 

Alfresco

Please contact us prior to ordering to verify the availability of the item(s) you are interested in.  Alfresco products ship direct from the distributor and stock is constantly changing.  Stock can range from in stock to a backorder of a week or two or as far out as 4-5 months. 

Artisan

Please contact us prior to ordering to verify the availability of the item(s) you are interested in.  Artisan products ship direct from the distributor and stock is constantly changing.  Stock can range from in stock to a backorder of a week or two or as far out as 4-5 months. 

 

C4 Fabrication *

Items are made-to order and have a manufacturers lead-time and a 20% restocking fee upon cancellation.

Front Bumpers have a current lead time of up to 14 weeks production time.

Rear Bumpers have a current lead time of up to 14 weeks production time.

Lo Pro Bumpers have a current lead time of up to 6 weeks production time

Rock Sliders have a current lead time of up to 14 weeks production time.

Skid Plates have a current lead time of up to 12 weeks production time.

Hatch Ladder ships within 4 weeks.

Bed Racks have a current lead time of 6-8 weeks.

For any other product, please reach out for current lead times.

 

Cali Raised *

Rock Sliders are 2-4 weeks raw, 4-6 weeks coated.

Bed Racks are 1-2 week lead time.

Light Bars are 7-10 day ship time.

Molle Panels 3-6 weeks lead time.

 

CBI Offroad Fab *

Items are made-to order and have a manufacturers lead-time and a 20% restocking fee upon cancellation.

Bumpers
Steel Front Bumpers | 6+ Weeks
Aluminum Front Bumpers | 4+ Weeks
Rear Bumpers | 8+ Weeks
Covert Bumpers | 4 Weeks

Racks & Bars
Bed Racks | 4 Weeks
Bed Bars | 1 Week
Prinsu Roof Racks | 1 Week

Rock Sliders
Rock Sliders | 4 Weeks

Skid Plates
Skid Plates | 4 Weeks

Accessories
Ditch Light Brackets | 1-2 Weeks
CBI Accessories | 1-2 Weeks
Prinsu Accessories | 1-2 Weeks

For any other product, please reach out for current lead times. 

 

Chicago Brick Oven

Products may have a lead time of a few weeks. Please reach out for current lead time on a given item

 

Goose Gear *

Goose Gear made-to-order products have the following lead times:

Plate Systems: minimum 8 weeks

Modules and Cabinets: minimum 12 weeks

Please reach out for any questions.

 

KC HiLiTES

Roof Racks - due to an increased amount of orders, please allow for up to 8 weeks on shipments.
 

Partner Steel *

Partner Steel is currently caught up and has no lead time!

 

PEAK Engineering

PEAK products ship direct to you from PEAK, lead times vary by product. Ship times can vary from a few day to several weeks.

If you have any questions, please contact us 

 

Prinsu*

Prinsu Roof Racks & Top Racks | 1-3 Weeks

CBI Bed Bars | 1 Week

CBI Bed Racks | 4 Weeks

Prinsu Accessories | 1-2 Week

For any other product, please reach out for current lead times.

Purchases made can be returned for any reason within 30 days of purchase. All returned items must be in new, resalable condition and include original packaging and all hardware and accessories. The return shipping cost is the responsibility of the customer and a 20% restocking fee will apply. (If the product has been mounted or used it is not in new, resalable condition and will incur a 25% restocking fee) Items that were customized to ANY degree are not eligible for return.

After 30 days, non-warranty related returns are at the sole discretion of Aventuron and/or Prinsu Design Studio. A restocking fee of 20% will apply as long as the items have not been mounted or used. Return shipping costs are the responsibility of the customer. If the returned products are not in new, resalable condition – a repackaging, restocking, and/or damaged goods fee of up to 30% of the product value may be deducted from the refund.

 

Thomas & Thomas

All T&T rods are handcrafted at their factory in Greenfield, MA. Please allow up to 4-6 weeks for their craftsman to build your rod if it is not in stock at our warehouse.  We do stock several models and variants.  If worried about lead-time contact us to learn if your rod is in stock before ordering.

 

Twin Eagles

Please contact us prior to ordering to verify the availability of the item(s) you are interested in.  Though we have some stock in our warehouse, the bulk of Twin Eagles products ship direct from the distributor and stock is constantly changing.  Stock can range from in stock to a backorder of up to 26 weeks.

 

Yeti Cycles

Due to the nature of ordering and building Yeti Cycles, you have 1 hour to change your mind and cancel your order on a full build bike. After that time period, you are subject to a 10% restocking fee to cover our costs already incurred. If you wish, you can receive a refund of 25% or more in store credit with the remainder returned on your original payment method.

Please allow 4-6 weeks for order fulfillment on Yeti Cycles. 

 Wader Care & DIY Repair

CARING FOR YOUR WADERS

• SIMMS waders are all built from a durable breathable fabric. Whether that is GORE-TEX® or Toray®, the care that should be taken is the same.

• Waders should be dried after each use, both inside and out. Simms understands that certain situations do not allow for time to fully dry between uses. It is the expectation that this circumstance will contribute to a potential shorter lifespan.

• Breathable fabrics are porous in nature and can collect dirt, oils from the skin and other environmental substances. Regular cleaning of waders is a key contributor to their lifespan.

• Depending on the number of days used, annual, bi-annual or tri-annual washing is recommended.

• Exposure to salt water or salt air requires special care: The waders must be rinsed thoroughly with fresh water and dried after each use.

• Do not store inside your car for long periods of time. Excess heat will damage your waders.

• Always put your waders on using a protective mat to shield the neoprene feet from rocks. SIMMS makes the perfect companion for your waders, the SIMMS Taco wader storage bag and changing mat. The Taco Bag zips completely open to provide an ideal changing surface. When you're done fishing, you can store your damp waders in a ventilated bag such as a Simms Taco Bag.

• When you get home, you can hang your waders to dry thoroughly.

• Regular washing helps maintain the waterproof, breathability of your waders. Wader fabrics are actually micro porous, allowing body moisture to move outwards while preventing water from coming in.

 

DIY Repair

WADERS-PINHOLE LEAK REPAIR

While one single pinhole may not cause a noticeable leak, left unrepaired, more pinholes can form causing a larger issue. Regular inspection and preventative maintenance should be performed. 

 

 

WADER STRAP DIVIDER

 

PATCHING WADERS

 

ZIPPER REPAIR

 

REPAIRING WADERS: BOA LACING SYSTEM REPAIR

Wader Storage

Waders are meant to be used but there will be times that they're stored away. During these durations, there are a few guidelines to follow:

• Hanging waders is the best storage method. Simms sews a hang loop in the back of the waders. This should be used rather than the suspenders. Suspenders are elastic and will stretch out.

  If you are planning on storing your waders after the season is over, we recommend rolling your waders and storing in a cool dry place. Excessive folds can damage the integrity of the material.

• Store waders in a cool dry place. Humidity and moisture can promote the growth of mildew, the silent killer. Mildew can work its way beneath the seam tape and begin to lift it up. Once this begins, repairs are difficult if not impossible.

Transport 

Getting your waders to and from your favorite angling spot is important.

• Waders should be transported inside the vehicle. The open truck bed offers endless possibilities for issues to occur. 

• Driving in your waders: We do not advise driving in your waders. While it may be easy to move from spot to spot, the seatbelt, seat material, buckles and etc. can create wear spots on the waders. 

Technical Fabric Care (excludes Simms Waders)

Gore-Tex and other technical fabrics will be at peak performance when kept clean and free from dirt, sunscreen, oils from skin and perspiration.
Technical fabrics should be washed in warm water (100 degrees) using a detergent that is free from bleach and fabric softener. Both powdered and liquid detergents work fine. A performance tech wash, such as Nikwax can also be used. With the exception of Simms Waders, technical fabrics can be placed in a dryer. For best results, tumble dry on a warm setting for ten-minute intervals. The warmth of the dryer can also renew the DWR (durable water repellent) treatment on the fabric. This causes water to bead up and run off the fabric.

 

Washing Waders

Use a washing machine without an agitator or hand wash. Use cold water and normal detergent that does not contain bleach. Once you have washed the waders make sure you dry them properly. Start by turning the waders inside out and hang dry. Once dry, flip them right side out to complete the proces