Galvan Fly Reels  |  SKU: T-3 R GRN

Galvan Torque Fly Reel

$400.00 USD
Shipping calculated at checkout.

Line Weight
Color

Ships From: Manufacturer

Delivery and Shipping

Agreeing to our terms and conditions on your order means you are acknowledging the below.  Placing an order allocates product to you, however there may be a manufacturer's lead-time or back-order.  We frequently make changes to the below as brands provide us updates. All lead times are estimations and are not exact time frames.

* Made-to-order products are non-refundable.  Cancellations prior to shipping may be subject to 10-20% cancellation fees.  These brands are noted with (*).

 

Alfa Ovens

Ovens and accessories may have a lead time of a few weeks. Please reach out for current lead time on a given item

 

Alfresco

Please contact us prior to ordering to verify the availability of the item(s) you are interested in.  Alfresco products ship direct from the distributor and stock is constantly changing.  Stock can range from in stock to a backorder of a week or two or as far out as 4-5 months. 

Artisan

Please contact us prior to ordering to verify the availability of the item(s) you are interested in.  Artisan products ship direct from the distributor and stock is constantly changing.  Stock can range from in stock to a backorder of a week or two or as far out as 4-5 months. 

 

C4 Fabrication *

Items are made-to order and have a manufacturers lead-time and a 20% restocking fee upon cancellation.

Front Bumpers have a current lead time of up to 14 weeks production time.

Rear Bumpers have a current lead time of up to 14 weeks production time.

Lo Pro Bumpers have a current lead time of up to 6 weeks production time

Rock Sliders have a current lead time of up to 14 weeks production time.

Skid Plates have a current lead time of up to 12 weeks production time.

Hatch Ladder ships within 4 weeks.

Bed Racks have a current lead time of 6-8 weeks.

For any other product, please reach out for current lead times.

 

Cali Raised *

Rock Sliders are 2-4 weeks raw, 4-6 weeks coated.

Bed Racks are 1-2 week lead time.

Light Bars are 7-10 day ship time.

Molle Panels 3-6 weeks lead time.

 

CBI Offroad Fab *

Items are made-to order and have a manufacturers lead-time and a 20% restocking fee upon cancellation.

Bumpers
Steel Front Bumpers | 6+ Weeks
Aluminum Front Bumpers | 4+ Weeks
Rear Bumpers | 8+ Weeks
Covert Bumpers | 4 Weeks

Racks & Bars
Bed Racks | 4 Weeks
Bed Bars | 1 Week
Prinsu Roof Racks | 1 Week

Rock Sliders
Rock Sliders | 4 Weeks

Skid Plates
Skid Plates | 4 Weeks

Accessories
Ditch Light Brackets | 1-2 Weeks
CBI Accessories | 1-2 Weeks
Prinsu Accessories | 1-2 Weeks

For any other product, please reach out for current lead times. 

 

Chicago Brick Oven

Products may have a lead time of a few weeks. Please reach out for current lead time on a given item

 

Goose Gear *

Goose Gear made-to-order products have the following lead times:

Plate Systems: minimum 8 weeks

Modules and Cabinets: minimum 12 weeks

Please reach out for any questions.

 

KC HiLiTES

Roof Racks - due to an increased amount of orders, please allow for up to 8 weeks on shipments.
 

Partner Steel *

Partner Steel is currently caught up and has no lead time!

 

PEAK Engineering

PEAK products ship direct to you from PEAK, lead times vary by product. Ship times can vary from a few day to several weeks.

If you have any questions, please contact us 

 

Prinsu*

Prinsu Roof Racks & Top Racks | 1-3 Weeks

CBI Bed Bars | 1 Week

CBI Bed Racks | 4 Weeks

Prinsu Accessories | 1-2 Week

For any other product, please reach out for current lead times.

Purchases made can be returned for any reason within 30 days of purchase. All returned items must be in new, resalable condition and include original packaging and all hardware and accessories. The return shipping cost is the responsibility of the customer and a 20% restocking fee will apply. (If the product has been mounted or used it is not in new, resalable condition and will incur a 25% restocking fee) Items that were customized to ANY degree are not eligible for return.

After 30 days, non-warranty related returns are at the sole discretion of Aventuron and/or Prinsu Design Studio. A restocking fee of 20% will apply as long as the items have not been mounted or used. Return shipping costs are the responsibility of the customer. If the returned products are not in new, resalable condition – a repackaging, restocking, and/or damaged goods fee of up to 30% of the product value may be deducted from the refund.

 

Thomas & Thomas

All T&T rods are handcrafted at their factory in Greenfield, MA. Please allow up to 4-6 weeks for their craftsman to build your rod if it is not in stock at our warehouse.  We do stock several models and variants.  If worried about lead-time contact us to learn if your rod is in stock before ordering.

 

Twin Eagles

Please contact us prior to ordering to verify the availability of the item(s) you are interested in.  Though we have some stock in our warehouse, the bulk of Twin Eagles products ship direct from the distributor and stock is constantly changing.  Stock can range from in stock to a backorder of up to 26 weeks.

 

Yeti Cycles

Due to the nature of ordering and building Yeti Cycles, you have 1 hour to change your mind and cancel your order on a full build bike. After that time period, you are subject to a 10% restocking fee to cover our costs already incurred. If you wish, you can receive a refund of 25% or more in store credit with the remainder returned on your original payment method.

Please allow 4-6 weeks for order fulfillment on Yeti Cycles. 

Care information

Freshwater Use

Galvan reels require very little cleaning and maintenance when used in freshwater. However, to keep your reel running smoothly we recommend an occasional wipe down of the spindle and a tiny drop of reel lube on the spindle.

Regular Saltwater Use

By this we mean the reel has not been dunked. We recommend that you clean your reel every time after exposure to salt or alkali environments. To clean your reel, first loosen the drag all the way counterclockwise to the lowest setting and remove the spool from the the frame. Soak both in fresh, warm water. After soaking, rinse both the spool and the frame thoroughly, ensuring the drag area gets a little extra attention. Inspect the pawl area on the frame and the gear area on the spool for dirt, grit or build up. If any buildup is found, rinse a little more aggressively. Let the spool and frame air dry before replacing the spool back onto the frame and storing.

Heavy Saltwater Use

By this we mean the reel was dunked or heavily used in the salt with not much cleaning. We recommend a partial tear down of the drag assembly. To do this you must first remove the spool. Next, turn the frame over so that you see the back and using a flat head screwdriver, remove the screw that holds the drag adjustment knob in place. Remove the knob and knob washer revealing the 9/16’s spindle support nut. Now grasp the spindle with your thumb and fingers and using a socket wrench and 9/16’s socket, loosen counterclockwise and remove the spindle support nut. This will allow you to remove the drag assembly and provide access to the drag surface on the opposite side. This surface and the bottom surface of the drag assembly is what you want to clean with fresh, warm water. After cleaning, air dry and replace.

Warranty Info

All Galvan fly reels carry a lifetime warranty covering all parts and workmanship under normal use and conditions. This warranty provides that your Galvan reels will be repaired or replaced at no charge to the original owner. The warranty is effective only if purchased by you or for you from an Authorized Galvan Dealer such as Aventuron, with either registration of warranty card or proof of purchase. 

Galvan reserves the right to determine whether to repair or replace any Galvan reel or spool covered by this warranty. Galvan also reserves the right to replace any discontinued models or parts with current models or parts when necessary. Colors may vary between original and replacement parts.

Description

As the premier reel in the Galvan range, the Torque Series reels represent the culmination of a lifetime of fly-fishing and passion for reel design. Simply stated, it represents the very best of modern fly reel architecture. The Torque reel series was created because Boni wanted to create a revolutionary reel with a more substantial drag system than was presently available on the market. And it had to be sexy. Thus the Torque series reels were born.

The unique Torque reel, the fourth series created by Boni, was the first reel released with our Torque drag system, which is now employed in all of our reels. Its inception was in late 2002 with prototypes coming to life in 2003. After being tested, retested and modified, it was finally released to the public in 2004. It immediately won the 2004 Editor’s Choice in Fly Fish America and was ranked #3 in the recent Yellowstone Angler’s 8-wt reel shootout, beating a host of other reels in function and price (link). Its original style and unique porting has solidified Galvan’s reputation as a leading innovator in the industry.

The visually striking appearance of the Torque reels is a result of the unique cut-outs on the frame, spool, drag knob and reel foot. This design is not only aesthetic but also structural as it significantly reduces the weight of the reel while maintaining strength and increasing rigidity .The rounded rims on both spool and frame enhance durability to better withstand impact during extreme angling conditions.

At first glance, the hand is drawn to the reel and from the first crank of the contoured counter balanced spool, the reel’s quality is apparent. It is a combination of efficiency and simplicity driven by function. In this case, less is more and cost is no exception as Torque reels retail at half the price of reels in its class.

Torque Series reels are saltwater safe and will perform flawlessly under the harshest conditions. From remote alpine lakes to the saltwater flats, the highly ventilated spool and frame balance nicely with the lightest of today’s fly rods yet still compliment a modern big-game saltwater fly rod. The Torque is tough as nails and skillfully marries the technology of the future with the tradition of the past.

*There may be a lead time on this product. Please contact us to receive current lead time
Specs
Model & Diameter Spool Width Weight(oz.) Line Weights Line Capacity Yards Micron Backing (lbs.) Micron Backing Reel Price Spool Price
T- 3 (3.0) .85″ 4.2 2-3 WF-2-F / WF-3-F 75 yd / 50 yd 20 lb $345.00 $155.00
T- 4 (3.25) .85″ 4.5 4-5 WF-4-F / WF-5-F 100 yd / 75 yd 20 lb $365.00 $165.00
T- 5 (3.5) .90″ 4.8 5-6 WF-5-F / WF-6-F 125 yd / 100 yd 20 lb $385.00 $175.00
T-6 (3.75) .95″ 5.2 6-7 WF-6-F / WF-7-F 150 yd / 125 yd 20 lb $410.00 $185.00
T-7 (3.875) 1.1″ 6.3 7 WF-7-F 150 yd 20 lb $420.00 $195.00
T- 8 (4.0) 1.25″ 7.6 8 WF-8-F 200 yd 20 lb $430.00 $200.00
T-9 (4.125) 1.25″ 7.9 9 WF-9-F 200 yd 20 lb $455.00 $210.00
T-10 (4.25) 1.35″ 8.2 10 WF-10-F 250 yd 30 lb $480.00 $220.00
T-12 (4.5) 1.35″ 8.6 12 WF-12-F 300 yd 30 lb $535.00 $250.00

Have A Question? Let Us Help!

Galvan Torque Fly Reel - Aventuron
Galvan Fly Reels

Galvan Torque Fly Reel

From $400.00 USD

As the premier reel in the Galvan range, the Torque Series reels represent the culmination of a lifetime of fly-fishing and passion for reel design. Simply stated, it represents the very best of modern fly reel architecture. The Torque reel series was created because Boni wanted to create a revolutionary reel with a more substantial drag system than was presently available on the market. And it had to be sexy. Thus the Torque series reels were born.

The unique Torque reel, the fourth series created by Boni, was the first reel released with our Torque drag system, which is now employed in all of our reels. Its inception was in late 2002 with prototypes coming to life in 2003. After being tested, retested and modified, it was finally released to the public in 2004. It immediately won the 2004 Editor’s Choice in Fly Fish America and was ranked #3 in the recent Yellowstone Angler’s 8-wt reel shootout, beating a host of other reels in function and price (link). Its original style and unique porting has solidified Galvan’s reputation as a leading innovator in the industry.

The visually striking appearance of the Torque reels is a result of the unique cut-outs on the frame, spool, drag knob and reel foot. This design is not only aesthetic but also structural as it significantly reduces the weight of the reel while maintaining strength and increasing rigidity .The rounded rims on both spool and frame enhance durability to better withstand impact during extreme angling conditions.

At first glance, the hand is drawn to the reel and from the first crank of the contoured counter balanced spool, the reel’s quality is apparent. It is a combination of efficiency and simplicity driven by function. In this case, less is more and cost is no exception as Torque reels retail at half the price of reels in its class.

Torque Series reels are saltwater safe and will perform flawlessly under the harshest conditions. From remote alpine lakes to the saltwater flats, the highly ventilated spool and frame balance nicely with the lightest of today’s fly rods yet still compliment a modern big-game saltwater fly rod. The Torque is tough as nails and skillfully marries the technology of the future with the tradition of the past.

*There may be a lead time on this product. Please contact us to receive current lead time
Specs
Model & Diameter Spool Width Weight(oz.) Line Weights Line Capacity Yards Micron Backing (lbs.) Micron Backing Reel Price Spool Price
T- 3 (3.0) .85″ 4.2 2-3 WF-2-F / WF-3-F 75 yd / 50 yd 20 lb $345.00 $155.00
T- 4 (3.25) .85″ 4.5 4-5 WF-4-F / WF-5-F 100 yd / 75 yd 20 lb $365.00 $165.00
T- 5 (3.5) .90″ 4.8 5-6 WF-5-F / WF-6-F 125 yd / 100 yd 20 lb $385.00 $175.00
T-6 (3.75) .95″ 5.2 6-7 WF-6-F / WF-7-F 150 yd / 125 yd 20 lb $410.00 $185.00
T-7 (3.875) 1.1″ 6.3 7 WF-7-F 150 yd 20 lb $420.00 $195.00
T- 8 (4.0) 1.25″ 7.6 8 WF-8-F 200 yd 20 lb $430.00 $200.00
T-9 (4.125) 1.25″ 7.9 9 WF-9-F 200 yd 20 lb $455.00 $210.00
T-10 (4.25) 1.35″ 8.2 10 WF-10-F 250 yd 30 lb $480.00 $220.00
T-12 (4.5) 1.35″ 8.6 12 WF-12-F 300 yd 30 lb $535.00 $250.00

Line Weight

  • 2/3
  • 4/5
  • 5/6
  • 6/7
  • 7
  • 8
  • 9
  • 10
  • 12

Color

  • Green
  • Clear
  • Black
  • Blue
  • Burnt-Orange
View product