Nautilus  |  SKU: GTXB

Nautilus GTX Fly Reel

$1,300.00 USD
Shipping calculated at checkout.

Color

Ships From: Manufacturer

Delivery and Shipping

Agreeing to our terms and conditions on your order means you are acknowledging the below.  Placing an order allocates product to you, however there may be a manufacturer's lead-time or back-order.  We frequently make changes to the below as brands provide us updates. All lead times are estimations and are not exact time frames.

* Made-to-order products are non-refundable.  Cancellations prior to shipping may be subject to 10-20% cancellation fees.  These brands are noted with (*).

 

Alfa Ovens

Ovens and accessories may have a lead time of a few weeks. Please reach out for current lead time on a given item

 

Alfresco

Please contact us prior to ordering to verify the availability of the item(s) you are interested in.  Alfresco products ship direct from the distributor and stock is constantly changing.  Stock can range from in stock to a backorder of a week or two or as far out as 4-5 months. 

Artisan

Please contact us prior to ordering to verify the availability of the item(s) you are interested in.  Artisan products ship direct from the distributor and stock is constantly changing.  Stock can range from in stock to a backorder of a week or two or as far out as 4-5 months. 

 

C4 Fabrication *

Items are made-to order and have a manufacturers lead-time and a 20% restocking fee upon cancellation.

Front Bumpers have a current lead time of up to 14 weeks production time.

Rear Bumpers have a current lead time of up to 14 weeks production time.

Lo Pro Bumpers have a current lead time of up to 6 weeks production time

Rock Sliders have a current lead time of up to 14 weeks production time.

Skid Plates have a current lead time of up to 12 weeks production time.

Hatch Ladder ships within 4 weeks.

Bed Racks have a current lead time of 6-8 weeks.

For any other product, please reach out for current lead times.

 

Cali Raised *

Rock Sliders are 2-4 weeks raw, 4-6 weeks coated.

Bed Racks are 1-2 week lead time.

Light Bars are 7-10 day ship time.

Molle Panels 3-6 weeks lead time.

 

CBI Offroad Fab *

Items are made-to order and have a manufacturers lead-time and a 20% restocking fee upon cancellation.

Bumpers
Steel Front Bumpers | 6+ Weeks
Aluminum Front Bumpers | 4+ Weeks
Rear Bumpers | 8+ Weeks
Covert Bumpers | 4 Weeks

Racks & Bars
Bed Racks | 4 Weeks
Bed Bars | 1 Week
Prinsu Roof Racks | 1 Week

Rock Sliders
Rock Sliders | 4 Weeks

Skid Plates
Skid Plates | 4 Weeks

Accessories
Ditch Light Brackets | 1-2 Weeks
CBI Accessories | 1-2 Weeks
Prinsu Accessories | 1-2 Weeks

For any other product, please reach out for current lead times. 

 

Chicago Brick Oven

Products may have a lead time of a few weeks. Please reach out for current lead time on a given item

 

Goose Gear *

Goose Gear made-to-order products have the following lead times:

Plate Systems: minimum 8 weeks

Modules and Cabinets: minimum 12 weeks

Please reach out for any questions.

 

KC HiLiTES

Roof Racks - due to an increased amount of orders, please allow for up to 8 weeks on shipments.
 

Partner Steel *

Partner Steel is currently caught up and has no lead time!

 

PEAK Engineering

PEAK products ship direct to you from PEAK, lead times vary by product. Ship times can vary from a few day to several weeks.

If you have any questions, please contact us 

 

Prinsu*

Prinsu Roof Racks & Top Racks | 1-3 Weeks

CBI Bed Bars | 1 Week

CBI Bed Racks | 4 Weeks

Prinsu Accessories | 1-2 Week

For any other product, please reach out for current lead times.

Purchases made can be returned for any reason within 30 days of purchase. All returned items must be in new, resalable condition and include original packaging and all hardware and accessories. The return shipping cost is the responsibility of the customer and a 20% restocking fee will apply. (If the product has been mounted or used it is not in new, resalable condition and will incur a 25% restocking fee) Items that were customized to ANY degree are not eligible for return.

After 30 days, non-warranty related returns are at the sole discretion of Aventuron and/or Prinsu Design Studio. A restocking fee of 20% will apply as long as the items have not been mounted or used. Return shipping costs are the responsibility of the customer. If the returned products are not in new, resalable condition – a repackaging, restocking, and/or damaged goods fee of up to 30% of the product value may be deducted from the refund.

 

Thomas & Thomas

All T&T rods are handcrafted at their factory in Greenfield, MA. Please allow up to 4-6 weeks for their craftsman to build your rod if it is not in stock at our warehouse.  We do stock several models and variants.  If worried about lead-time contact us to learn if your rod is in stock before ordering.

 

Twin Eagles

Please contact us prior to ordering to verify the availability of the item(s) you are interested in.  Though we have some stock in our warehouse, the bulk of Twin Eagles products ship direct from the distributor and stock is constantly changing.  Stock can range from in stock to a backorder of up to 26 weeks.

 

Yeti Cycles

Due to the nature of ordering and building Yeti Cycles, you have 1 hour to change your mind and cancel your order on a full build bike. After that time period, you are subject to a 10% restocking fee to cover our costs already incurred. If you wish, you can receive a refund of 25% or more in store credit with the remainder returned on your original payment method.

Please allow 4-6 weeks for order fulfillment on Yeti Cycles. 

Care information

Nautilus® NV series:
  1. After each outing, remove spool by unscrewing the nameplate on the spool.
  2. Lightly wash down spool, brake hub and frame to remove salt and grit.
  3. Allow reel to dry before replacing spool on frame for storage.
  4. If submerged, no problem: perform steps 1 through 3.

Feel free to sporadically apply a medium-heavy all purpose grease around the top of the brake hub. The drag system is sealed and maintenance free and does not require any form of maintenance. Do not attempt to disassemble your reel’s brake hub. This will result in damage to a factory installed seal and will void the warranty.

Nautilus® X and CCF-X2 series:
  1. After each outing, remove spool from housing.
  2. Lightly wash down spool, spool shaft and housing to remove salt, dirt or grit.
  3. Allow reel to dry before replacing the spool on housing for storage.
  4. If submerged, no problem: perform steps 1 through 3.

Switching Retrieve Direction

Nautilus® NV series: NV reels need to be switched by your authorized Nautilus Reels dealer or by the Nautilus Reels factory. Contact your dealer or Nautilus Reels at (305)625-3437 with any questions regarding this matter.
Nautilus® X series:
  1. Turn Drag to minimum.
  2. Loosen the 3 screws that fasten the brake hub to the frame with the supplied 1/16th” allen wrench.
  3. Remove brake hub and flip over the one-way clutch that is attached to the drive shaft inside the brake hub.
  4. Reassemble making sure that the one way clutch aligns into the drag plate and that the o-ring remains in place against the outer rim inside the brake unit.
Nautilus® CCF-X2 series:
  1. Turn drag down to near minimum.
  2. Loosen the 3 socket screws that fasten the brake hub to the frame with the 1/16th” allen wrench supplied.
  3. Remove brake hub and flip over the one-way clutch that is attached to the drive shaft inside the brake hub.
  4. Reassemble making sure that the one way clutch aligns into the drag plate and that the o-ring remains in place against the outer rim inside the brake unit.

Warranty Info

All Nautilus reels carry a limited lifetime warranty for the original owner covering any defect in materials and workmanship. This warranty provides that defective Nautilus fly reels will be repaired or replaced at our option at no charge for parts and labor. This warranty does not cover damage caused by accident, misuse, improper maintenance or modification.

Description

The GTX from Nautilus Reels is in a class of its own. Designed to be fished beyond IGFA regulations, this reel is equipped to go head-to-head with your terminal tackle, and with a maximum drag of 25+ pounds, the GTX is built to put the brakes on the fastest and strongest fish on the planet.

The GTX is a 5-inch diameter reel with a narrow 1.1-inch wide spool that holds 500 yards of 60-pound braid. The spool is lightweight and intricately machined with our Giga spool design to promote strength, maximum line pickup, and fast line drying to prevent corrosion when stored.

The GTX Pentadrag braking system is a brand new design that is best described as a hybrid NV-G/CCF-X2/X-Series drag on steroids. The new Pentadrag features 3 cork and carbon fiber surfaces and two free floating carbon fiber surfaces that are topped with a Kevlar®/carbon fiber hybrid precision plate that ensures even pressure at all points of the drag surfaces. The cork acts as an insulation and compression material to ensure a smooth drag transition while the carbon fiber delivers the market-leading overall smoothness that Nautilus Reels is known for.

To control the drag tension, Nautilus designed the all new GripTorq drag knob. Intricately machined on 4 axes to promote light weight, strength and more grip than on any other drag knob in the industry. The GTX GripTorq drag knob measures 1.9” in diameter.

The Nautilus Reels GTX delivers 8.7 ounces of optimized fighting power at an MSRP of $1300.00 for the reel and $575.00 for the spool. Available in matte black or brushed titanium anodizing.


Model Line Capacity – Weight Diameter
GTX WF12+300 yds #30 8.7 oz
WF12+540 yds #50 Gelspun

Details:

GTX Pentadrag

Giga: The Uber arbors of fly fishing reels. Reel in more than a foot per turn of the handle. A unique design feature of these spools is grooves that let the bottom of the backing breathe to promote faster drying. The giga arbors have redefined large arbor reel design.

Perpetually repels contaminants from braking system.

Wrap your line or hang your fly on it (*optional accessory)


GripTorq

Have A Question? Let Us Help!

Nautilus GTX Fly Reel - Aventuron
Nautilus

Nautilus GTX Fly Reel

$1,300.00 USD

The GTX from Nautilus Reels is in a class of its own. Designed to be fished beyond IGFA regulations, this reel is equipped to go head-to-head with your terminal tackle, and with a maximum drag of 25+ pounds, the GTX is built to put the brakes on the fastest and strongest fish on the planet.

The GTX is a 5-inch diameter reel with a narrow 1.1-inch wide spool that holds 500 yards of 60-pound braid. The spool is lightweight and intricately machined with our Giga spool design to promote strength, maximum line pickup, and fast line drying to prevent corrosion when stored.

The GTX Pentadrag braking system is a brand new design that is best described as a hybrid NV-G/CCF-X2/X-Series drag on steroids. The new Pentadrag features 3 cork and carbon fiber surfaces and two free floating carbon fiber surfaces that are topped with a Kevlar®/carbon fiber hybrid precision plate that ensures even pressure at all points of the drag surfaces. The cork acts as an insulation and compression material to ensure a smooth drag transition while the carbon fiber delivers the market-leading overall smoothness that Nautilus Reels is known for.

To control the drag tension, Nautilus designed the all new GripTorq drag knob. Intricately machined on 4 axes to promote light weight, strength and more grip than on any other drag knob in the industry. The GTX GripTorq drag knob measures 1.9” in diameter.

The Nautilus Reels GTX delivers 8.7 ounces of optimized fighting power at an MSRP of $1300.00 for the reel and $575.00 for the spool. Available in matte black or brushed titanium anodizing.


Model Line Capacity – Weight Diameter
GTX WF12+300 yds #30 8.7 oz
WF12+540 yds #50 Gelspun

Details:

GTX Pentadrag

Giga: The Uber arbors of fly fishing reels. Reel in more than a foot per turn of the handle. A unique design feature of these spools is grooves that let the bottom of the backing breathe to promote faster drying. The giga arbors have redefined large arbor reel design.

Perpetually repels contaminants from braking system.

Wrap your line or hang your fly on it (*optional accessory)


GripTorq

Color

  • Black
  • Brushed Silver
View product